|
SOLD - Titration Accessories offered: (1) Metrohm 803 Ti Stand, Nr 1803001022508 - LED pilot lamp on the front panel
- Platform (round, teal) for glass titration vessel
- 10mm Stainless steel rod (approximately 6-3/8-inch high) assembly, including stainless clamping ring (6.2013.010 to support rod) with adjusting screw
- Titration vessel holder P/N 6.2047.020 to support coulometric cells; normally used with 756, 831 KF coulometers
- Waste and Solvent tube line ports on the back panel of the unit
- One (1) MSB port (no cable)
- Screws on the back and the bottom of the unit are all intact
- Cable attachment (not removable) on the back panel with 8 pins on the end.
(2) Metrohm 6.2061.010 Exchange Unit with two placeholders for reagent bottles and placeholders for plastic tubes for buret tips or electrodes This unit includes: - 1000mL clear Schott/Duran (Retrace Code 100109870) with screwed on GL45 cap (teal), tube line assembly on the cap and inside the bottle, SGJ stopper, thread stoppers P/N 6.1446.080, bottle attachment P/N 6.1602.105 made of PFA/PP with GL45 thread, and plastic funnel in the bottle
- 1000mL amber reagent bottle with similar configuration as the clear bottle, except with some more add-ons, e.g., SGJ clip (red) P/N 6.2023.020, glass drying tube P/N 6.1609.000 with tube cover (black, P/N 6.2701.020) and tube line (including tube holder)
(3) KF Titration Vessel P/N 6.1464.320, made of glass, designed for 50-200mL capacity. Features: - Four (4) ports
- One (1) each Double Pt-wire electrodes for coulometry P/N 6.0341.100 Pt/-20 to 70 degrees Centigrade
- One (1) each 6.0345.100 electrode with glass tube insert (includes desiccant) and cable attachment
- Metal clip
- Glass assembly with two (2) side arms or tubulations and stopper (P/N 6.143.000) SGJ stopper SGJ14
- Thread stopper P/N 6.1446.080
- Tube lines connecting to amber and clear reagent bottles
- Stirring bar (inside the glass titration vessel)
- One (1) O'ring
NOTE: Clean and in excellent condition. Sold as is.
|
